Supermicro SuperServer 1019S-M2 — 6.6 Security

SuperServer 1019S-M2 User's Manual Chapter 6: BIOS Subnet Mask 6.6 Security This item displays the sub-network that this computer belongs to. The value of each three- digit number separated by dots should not exceed 255. This menu allows the user to configure the following security settings for the system. Station MAC Address This item displays the Station MAC address for this computer. Mac addresses are 6 two-digit hexadecimal numbers. Gateway IP Address This item displays the Gateway IP address for this computer. This should be in decimal and in dotted quad form (i.e., 172.31.0.1). IPMI Function Support Use this feature to enable IPMI support. The options are Enabled and Disabled.

When Disabled, the system powers on quickly by removing BIOS support for extended IPMI features. The Disable option is for applications that require faster power on time wthout using Supermicro Update Manager (SUM) or extended IPMI features. The BMC network configuration in the BIOS setup is also invalid when IPMI Function Support is disabled. The general BMC function and motherboard health monitor such as fan control are still functioning when this option is disabled. Password Check Select Setup for the system to check for a password at Setup. Select Always for the system to check for a password at bootup or upon entering the BIOS Setup utility. The options are Setup and Always.

Administrator Password Press Enter to create a new, or change an existing Administrator password. Secure Boot Menu This section displays the contents of the following secure boot features: System Mode Secure Boot Vendor Keys Secure Boot Use this item to enable secure boot. The options are Disabled and Enabled. 93 92