SuperServer 1019S-M2 User's Manual Chapter 6: BIOS Secure Boot Mode Append Key Use this item to select the secure boot mode. The options are Standard and Custom . Select Yes to add the database from the manufacturer's defaults to the existing DB. Select No to load the DB from a file. The options are Yes and No. CSM Support Select Enabled to support the EFI Compatibility Support Module (CSM), which provides compatibility support for traditional legacy BIOS for system boot. The options are Enabled and Disabled. Forbiden Signatures Set New Key Select Yes to load the DBX from the manufacturer's defaults. Select No to load the DBX from a file. The options are Yes and No.
Key Management This submenu allows the user to configure the following Key Management settings. Append Key Provision Factory Default Keys Select Yes to add the DBX from the manufacturer's defaults to the existing DBX. Select No to load the DBX from a file. The options are Yes and No. Select Enabled to install the default Secure-Boot keys set by the manufacturer. The options are Disabled and Enabled. Authorized TimeStamps Enroll All Factory Default Keys Set New Key Select Yes to install all default secure keys set by the manufacturer. The options are Yes and No. Select Yes to load the DBT from the manufacturer's defaults. Select No to load the DBT from a file. The options are Yes and No.
Save All Secure Boot Variables Append Key This feature allows the user to decide if all secure boot variables should be saved. Select Yes to add the DBT from the manufacturer's defaults list to the existing DBT. Select No to load the DBT from a file. The options are Yes and No. Platform Key (PK) This feature allows the user to configure the settings of the platform keys. Set New Key Select Yes to load the new platform keys (PK) from the manufacturer's defaults. Select No to load the platform keys from a file. The options are Yes and No. Key Exchange Key Set New Key Select Yes to load the KEK from the manufacturer's defaults. Select No to load the KEK from a file. The options are Yes and No.
Append Key Select Yes to add the KEK from the manufacturer's defaults list to the existing KEK. Select No to load the KEK from a file. The options are Yes and No. Authorized Signatures Set New Key Select Yes to load the database from the manufacturer's defaults. Select No to load the DB from a file. The options are Yes and No. 95 94