SUPERSERVER 2026TT-DLRF/DLIBXRF/DLIBQRF User's Manual Removing the Heatsink Warning! We do not recommend that the CPU or the heatsink be re- moved. However, if you do need to uninstall the heatsink, please follow the instructions below to prevent damage to the CPU or the CPU socket. ! Remove power from the system 1. and unplug the AC power cord from the power supply. Using a screwdriver, loosen and 2. remove the heatsink screws from the serverboard in the sequence as show in the picture on the right (two diagonal screws fi rst, then the remaining two). Remove Screw #1 Hold the heatsink as shown 3. in the picture on the right and gently wriggle the heatsink to loosen it from the CPU.
(Do not use excessive force when wriggling the heatsink.) Remove Screw #2 Once the heatsink is loose, 4. remove it from the CPU socket. To reinstall the CPU and the 5. heatsink, clean the surface of the CPU and the heatsink to get rid of the old thermal grease. Reapply the proper amount of thermal grease on the CPU surface before reinstalling the heatsink. 5-6