Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF — Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF User Manual PDF

SUPERSERVER 2026TT-DLRF/DLIBXRF/DLIBQRF User's Manual 5-7 Connector Defi nitions Front Panel Accessible Add-on Card Header (JF2) The JF2 add-on card header provides front access to the power supply, Serial ATA and Front Panel Control connections for the X8DTT-H series serverboard. Plug an add-on card into this header to use the functions indicated above. This header is designed specifi cally for a hot plug 2U daughter card. NMI Header The non-maskable interrupt header is lo- cated at JNMI1. Refer to the table on the right for pin defi nitions. Internal Buzzer The Internal Buzzer, located at JSPK1, can be used to provide audible alarms for various beep codes.

See the table on the right for pin defi nitions.. IPMB I2C SMB A System Management Bus header for the IPMI slot is located at IPMB. Connect the appropriate cable here to use the IPMB I2C connection on your system. See the table on the right for pin defi nitions.. 5-12 NMI Button Pin Defi nitions Pin# Defi nition 1 Control 2 Ground Internal Buzzer Pin Defi nitions Pin# Defi nition Pin 1 Pos. (+) Beep In Pin 2 Neg. (-) Alarm Speaker IPMB Header Pin Defi nitions Pin# Defi nition 1 Data 2 Ground 3 Clock 4 No Connection