Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF — Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF User Manual PDF

Chapter 5: Advanced Serverboard Setup Fan Header The X8DTT-H series serverboard has one fan header on the serverboard. This 4-pin header is backward compatible with tradition- al 3-pin fans, however, fan speed control is only available for 4-pin fans. The fan speeds are controlled by Thermal Management via Hardware Monitoring in the Advanced Setting in the BIOS. (The default setting is disabled.) See the table on the right for pin defi nitions. Universal Serial Bus (USB) Two Universal Serial Bus ports (USB0/1) are located on the I/O back panel. In addition, another two USB connections (USB2/3) are located at JUSB2 to provide front chassis access.

Connect USB cables to these USB ports/headers to use USB connections. (USB cables are not included). See the tables on the right for pin defi nitions. Serial Ports One serial port is included on the serverboard. The COM port is located beside the VGA port. See the table on the right for pin defi ni- tions. ( NC :

No Connection) 5-13 Fan Header Pin Defi nitions Pin# Defi nition 1 Ground 2 +12V 3 Tachometer 4 PWR Modulation Back Panel USB0/1 Pin Defi nitions Pin# Defi nition Pin# Defi nition 1 +5V 5 +5V 2 USB PN1 _ 6 USB PN0 _ 3 USB PP1 _ 7 USB PP0 _ 4 Ground 8 Ground Front Panel USB2/3 Pin Defi nitions USB 2 USB 3 Pin # Defi nition Pin # Defi nition 1 +5V 6 +5V 2 USB PN2 _ 7 USB PN3 _ 3 USB PP2 _ 8 USB PP3 _ 4 Ground 9 Ground 5 No Connection 10 Key Serial Port Pin Defi nitions Pin Defi nitions Pin # Defi nition Pin # Defi nition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 Ground 10 NC