Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF — Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF User Manual PDF

Chapter 5: Advanced Serverboard Setup LAN1/LAN2 Enable/Disable Change the setting of jumper JPL1/JPL2 to enable or disable the LAN1 and LAN2 ports respectively. See the table on the right for jumper settings. The default setting is enabled. Watch Dog Enable/Disable JWD1 enables the Watch Dog function, a system monitor that takes action when a software application freezes the system. Jumping pins 1-2 will have Watch Dog reboot the system if a program freezes. Jumping pins 2-3 will generate a non-maskable inter- rupt for the program that has frozen. See the table on the right for jumper settings. Watch Dog must also be enabled in BIOS. Note :

When Watch Dog is enabled, you must write your own application software to disable the Watch Dog Timer. VGA Enable/Disable JPG1 allows you to enable or disable the VGA port. The default position is on pins 1 and 2 to enable VGA. See the table on the right for jumper settings. 5-17 LAN1/2 Enable/Disable Jumper Settings Jumper Setting Defi nition Pins 1-2 Enabled Pins 2-3 Disabled Watch Dog Jumper Settings Jumper Setting Defi nition Pins 1-2 Reset Pins 2-3 NMI Open Disabled VGA Enable/Disable Jumper Settings Jumper Setting Defi nition Pins 1-2 Enabled Pins 2-3 Disabled