Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF — Supermicro SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF User Manual PDF

SUPERSERVER 2026TT-DLRF/DLIBXRF/DLIBQRF User's Manual Figure 6-1. Chassis Front View SAS/SATA Drives Node A Control Panel Node B Control Panel Figure 6-2. Chassis Rear View Dedicated IPMI LAN Port LAN Ports Power Supply PCI-Express Slots PCI-Express Slots Dedicated IPMI LAN Port LAN Ports USB Ports COM Port VGA Port USB Ports COM Port VGA Port 6-2 Control Panel Each control panel on the front of the chassis must be connected to the JF2 con- nector on its associated serverboard to provide you with system control buttons and status indicators. These wires have been bundled together in a ribbon cable to simplify the connection.

Connect the cable from JF2 on the serverboard to the control panel PCB (printed circuit board). Make sure the red wire plugs into pin 1 on both connectors. Pull all excess cabling out of the airfl ow path. The LEDs inform you of system status for the serverboard it is connected to. See Chapter 3 for details on the LEDs and the control panel buttons. 6-3 System Fans The system has four hot-swappable 8-cm PWM fans to provide the cooling for both nodes. The fans connect directly to the backplane but receive their power from the serverboard they are connected to logically. Fan speed may be controlled by a setting in BIOS (see Chapter 7). 6-2