Supermicro — 2028TP-DECR-DECTR-DECFR_1.0.indb

SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual Select Enabled to enable hot-plugging support for a port specifi ed by the user, which will allow the user to replace a SATA disk drive installed on this port without shutting down the system. The options are Enabled and Disabled . Port 0 ~ Port 5 Hot Plug Port 0 ~ Port 5 Spin Up Device On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRESET initialization to the device. The options are Enabled and Disabled . Port 0 ~ Port 5 SATA Device Type Use this item to specify if the SATA port specifi ed by the user should be connected to a Solid State drive or a Hard Disk Drive.

The options are Hard Disk Drive and Solid State Drive. sSATA Confi guration When this submenu is selected, AMI BIOS automatically detects the presence of the SATA devices that are supported by the PCH-sSATA controller and displays the following items: sSATA Controller This item enables or disables the onboard SATA controller supported by the Intel PCH-sSATA controller. The options are Enabled and Disabled. Confi gure sSATA as Select IDE to confi gure an sSATA drive specifi ed by the user as an IDE drive. Select AHCI to confi gure an sSATA drive specifi ed by the user as an AHCI drive. Select RAID to confi gure an sSATA drive specifi ed by the user as a RAID drive.

The options are IDE, AHCI , and RAID. *If the item above "Confi gure sSATA as" is set to AHCI, the following items will display: Support Aggressive Link Power Management When this item is set to Enabled, the SATA AHCI controller manages the power usage of the SATA link. The controller will put the link to a low power state when the I/O is inactive for an extended period of time, and the power state will return to normal when the I/O becomes active. The options are Enabled and Disabled. 7-20