Chapter 7: BIOS sSATA Port 0~ Port 3 This item displays the information detected on the installed on the sSATA port. specifi ed by the user. Model number of drive and capacity Software Preserve Support Select Enabled to enable an sSATA port specifi ed by the user. The options are Disabled and Enabled. sSATA Port 0~ Port 3 sSATA Port 0 ~ Port 3 Hot Plug Select Enabled to enable hot-plugging support for a port specifi ed by the user, which will allow the user to replace a sSATA disk drive installed on this port without shutting down the system. The options are Enabled and Disabled.
sSATA Port 0 ~ Port 3 Spin Up Device On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRESET initialization to the device. The options are Enabled and Disabled . Port 0 ~ Port 3 sSATA Device Type Use this item to specify if the sSATA port specifi ed by the user should be connected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk Drive and Solid State Drive. *If the item above "Confi gure sSATA as" is set to IDE, the following items will display: sSATA Port 0~ Port 3 This item indicates that an sSATA port specifi ed by the user is installed (present) or not.
Port 0 ~ Port 3 sSATA Device Type (Available when a SATA port is detected) Use this item to specify if the sSATA port specifi ed by the user should be connected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk Drive and Solid State Drive. *If the item above "Confi gure sSATA as" is set to RAID, the following items will display: 7-21