Chapter 1: Introduction An Intel i350 Gigabit (10/100/1000 Mb/s) Ethernet dual-channel controller is included on the X10DRT-P and X10DRT-PIBF. The X10DRT-PT has an Intel X540 10-Gigabit Ethernet dual-channel controller. A Connect-X3 port for Infi niBand™ (on), which supports a single QSFP connector, is provided on the X10DRT-PIBF only. The I/O ports include a VGA (monitor) port, two USB 3.0 ports (additional one internal USB headers are included on the serverboard), an IPMI dedicated LAN port and two Ethernet ports. Onboard Controllers/Ports Note:
For IPMI Confi guration Instructions, please refer to the Embedded BMC Configuration User's Guide available at http://www.supermicro.com/support/ manuals/ . Graphics Controller The X10DRT-P/PIBF/PT features an integrated ASpeed 2400 BMC with an integrated VGA/2D graphics controller. Infi niBand The 2028TP-DECFR server includes an FDR (fourteen data rate, 14Gb/s data rate per lane speed) Infi niBand QSFP connector. Infi niBand is a scalable serial communications link intended for connecting processors with high-speed peripherals.
Other Features Other onboard features that promote system health include onboard voltage monitors and power supply monitor, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus protection, node manager software and BIOS rescue. 1-3 Server Chassis Features The following is a general outline of the main features of the SC217 server chassis. System Power Each SC217 chassis model includes a high-effi ciency 94% Platinum certifi ed power supply, rated at 1280 Watts plus one redundant backup power supply. In the unlikely event your power supply fails, replacement is simple and can be accomplished without tools. Note:
The power supplies are both redundant, hot-plug. 1-3