SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual The 2028TP-DECR/DECTR/DECFR supports up to twenty-four (24) 2.5" hot-swap SAS/SATA drives in trays (12 for each node). These drives are hot-swappable units and are connected to an adapter card that provides power and control. SAS/SATA Subsystem Note: The operating system you use must have RAID support to enable the hot- swap capability of the drives. Front Control Panel SC217 models include four front panels on the handles of the chassis which control each of the systems. Each control panel on the 2028TP-DECR/DECTR/DECFR server provides you with system monitoring and control for one server node.
LEDs indicate system power, HDD activity, network activity, system overheat and power supply failure. A main power ON/OFF button is also included. I/O Ports The SC217 chassis designed to be used in a 2U rackmount confi guration. The SC217 chassis provides a low-profi le add-on card slot, a VGA port, two USB 3.0 ports (additionally one internal USB header is included on the serverboard), two gigabit (2028TP-DECR/2028TP-DECFR servers) or 10-gigabit (2028TP-DECTR server) Ethernet ports, an IPMI Ethernet port and an Infi niBand® port (2028TP-DECFR server only) per node. Cooling System The SC217 chassis accepts four system fans, which are powered from the backplane. Note:
The fans in this system are NOT redundant, hot-plug. Air Shrouds The SC217 chassis includes two Mylar air shrouds that direct the airfl ow where cooling is needed on each serverboard. Always use the air shroud included with your chassis on each serverboard. The SC217 includes a set of quick-release rails, and can be placed in a rack for Mounting Rails secure storage and use. To setup your rack, follow the step-by-step instructions included in this manual. 1-4