Supermicro — 2028TP-DECR-DECTR-DECFR_1.0.indb

Chapter 2: Server Installation Checking the Components and Setup 1. You may have one or two processors already installed into the serverboard. Each processor needs its own heat sink. See Chapter 5 for instructions on processor and heat sink installation. 2. Your 2028TP-DECR/DECTR/DECFR server system may have come with system memory already installed. Make sure all DIMMs are fully seated in their slots. For details on adding system memory, refer to Chapter 5. 3. If desired, you can install add-on cards to the system. See Chapter 5 for details on installing PCI add-on cards. 4. Make sure all power and data cables are properly connected and not blocking the chassis airfl ow.

Also make sure that no cables are positioned in front of the fans. See Chapter 5 for details on cable connections. 2-11