Supermicro — 2028TP-DECR-DECTR-DECFR_1.0.indb

Chapter 5: Advanced Serverboard Setup X10DRT-P/PIBF/PT Quick Reference *X10DRT-PIBF only.

5-13 Jumper JBT1 Description Clear CMOS Default Setting See Section 5-9 JPB1 BMC Enabled Pins 1-2 (Enabled) JPG1 VGA Enabled Pins 1-2 (Enabled) JPL1 GLAN1/GLAN2 Enable Pins 1-2 (Enabled) JWD1 Watch Dog Pins 1-2 (RST) Connector Description COM1 COM Port 1 FAN3/FAN4 System Fan Headers JF1 Supermicro Proprietary Slot for Add-On Card for Power, Front Control Panel JIPMB1 4-pin External BMC I2C Header (for an IPMI Card) JSD1 SATA DOM (Device On Module) Power Connector JTPM1 TPM (Trusted Platform Module)/Port 80 LAN1/2 Gb Ethernet Ports 1/2 (IPMI) LAN Dedicated IPMI LAN Port QSFP Quad-channel Small Form-factor Pluggable (QSFP) Transceiver Connector used as Connect-X3 Infi niBand Port *(X10DRT-PIBF) S-SATA3 SATA DOM (Disk On Module) with Power-pin Connector (CPU2) Slot1 PCI-E 3.0 x16 Slot supported by CPU2 (CPU2) Slot2 PCI-E 3.0 x8 Slot supported by CPU2 SXB2 I-SATA 0-5/PCI-E 3.0 x8 Slot supported by CPU1 SXB1 S-SATA 0-2/PCI-E 3.0 x16 Slot supported by CPU2 UID SW UID (Unit Identifi er) Switch USB0/1 USB 3.0 Ports VGA VGA Port LED State BMC HB LED1 (BMC Heartbeat LED) _ _ Green (Blinking):

BMC Normal IB ACT LED1* _ _ Yellow (Blinking): Infi niBand Active IB LINK LED1* _ _ Green (On): Infi niBand On (Link LED) UID LED1 (Unit Identifi er LED) Blue (Blinking): Unit Identifi ed