Supermicro — 2028TP-DECR-DECTR-DECFR_1.0.indb

SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual 5-8 Connector Defi nitions Main Power Main power to the serverboard is supplied through the system midplane (BPN- SAS3-217HD), which receives power directly from the power supply. One hard drive backplane in each node (BPN-ADP-E1C-L-O-P) plugs into system backplane and the JF1 connector on the serverboard Ethernet LAN Ports Two Gigabit Ethernet ports (LAN1/2) are located on the I/O backplane on the X10DRT-P and X10DRT-PIBF. The X10DRT-PT features two 10 Gb Ethernet ports, also designated LAN1/2. In addition, an IPMI Dedicated LAN is located above USB 0/1 ports on the backplane to provide KVM support for IPMI 2.0.

All ports accept RJ45 type cables. Note : Refer to the LED Indicator Section for LAN LED information. Universal Serial Bus (USB) Two USB 3.0 ports (USB 0/1) are located on the rear I/O panel. See the table on the right for pin defi nitions. QSFP Connector The Quad Connector-X3 FDR 56 GT/s (4-channel) Small Form-factor Pluggable (QSFP) connector used as an Infi niBand (IB) port is located on the backpanel on the X10DRT-PIBF. The IB connection is primarily used for High-performance computing. VGA Port A VGA (video) port is provided on the I/O backplane. This connector is used to provide video and CRT display.

5-14 USB0/1 Pin Defi nitions Pin# Defi nition 1 +5V 2 D- 3 D+ 4 Ground 5 RX- 6 RX+ 7 Ground 8 TX- 9 TX+