Supermicro — 2028TP-DECR-DECTR-DECFR_1.0.indb

Chapter 6: Advanced Chassis Setup 6-12 Power Supply The SC217 chassis includes two 1280 Watt power supplies. This power supply is auto-switching capable. This enables it to automatically sense and operate at a 100v to 240v input voltage. An amber light will be illuminated on the power supply when the power is off. An illuminated green light indicates that the power supply is operating. Power Supply Replacement The SC217 chassis utilizes two redundant power supplies. In the unlikely event that the power supply unit needs to be replaced, one power supply can be removed, without powering down the system.

Replacement units can be ordered directly from Supermicro (See the contact information in the Preface of this manual). The SC217 chassis utilizes redundant, hot-plug power supplies. Changing the Power Supply 1. Push the release tab (on the back of the power supply) as illustrated. 2. Pull the power supply out using the handle provided. 3. Push the new power supply module into the power bay until it clicks into the locked position. Figure 6-19. Changing the Power Supply Release Tab 6-17