Supermicro SuperServer 5017C-TF — Supermicro SuperServer 5017C-TF User's Manual PDF Download

S UPER S ERVER 5017C-TF User's Manual 5-5 Installing Memory Note: Check the Supermicro web site for recommended memory modules. CAUTION Exercise extreme care when installing or removing DIMM modules to prevent any possible damage. Installing DIMMs Insert the desired number of DIMMs into the memory slots, starting with slots 1. DIMM1A. Pay attention to the notch along the bottom of the module to pre- vent inserting the DIMM module incorrectly. See Figure 5-5. Gently press down on the DIMM module until it snaps into place in the slot. 2. Repeat fstep 1 to install to DIMM1B if needed.

Memory Support The X9SCM-F supports up to 32GB of ECC unbuffered (UDIMM) DDR3-1333/1066 memory in four memory slots. Populating these slots with a pair of memory mod- ules of the same type and same size will result in interleaved memory, which will improve memory performance. Please refer to the table below:. Slot 2, Channel 2 (Blue Slot) Slot 2, Channel 1 Slot 1, Channel 2 (Blue Slot) Slot 1, Channel 1 5-8 DDR3 Unbuffered ECC (UDIMM) Memory DIMM Slots per Channel DIMMs DIMM Type PO Populated per Channel R Speeds Ranks per DIMM (any combination 2 1 Unbuffered 10 DDR3 66, 1333 Single Rank, Dual Rank 2 2 Unbuffered 10 DDR3 66, 1333 Single Rank, Dual Rank