S UPER S ERVER 5017C-TF User's Manual 5-6 Adding PCI Cards PCI Expansion Slots One riser card is used to support a PCI expansion (add-on) card in the system. The SC811TQ-350B chassis can accommodate one standard size (full-height half- length) PCI expansion card. PCI Card Installation Before installing a PCI add-on card, make sure it is supported by the riser card. Begin by releasing the locking tab that corresponds to the slot you wish to populate. Insert the expansion card into the riser card by pushing down with your thumbs evenly on both sides of the card. PCI Slot/Card Confi gurations Riser Card Expansion card supported CSE-RR1U-E8 (pre-installed) 1x PCI-E 2.0 x8 card 5-10