Supermicro SuperServer 5017C-TF — Supermicro SuperServer 5017C-TF User's Manual PDF Download

Chapter 5: Advanced Motherboard Setup Universal Serial Bus (USB) Two Universal Serial Bus ports (USB 0/1) are located on the I/O backpanel and an additional six USB ports in three head- ers, USB2/3, 4/5, 12/13 provide front/ back chassis access. USB 11 is a Type A USB connector. (USB cables are not included). See the tables on the right for pin defi nitions. Serial Port Pin Defi nitions (COM1/COM2) Serial Ports Pin # Defi nition Pin # Defi nition The COM1 Port is located on the I/O backpanel. COM2 is a header located on the the motherboard. See the table on the right for pin defi nitions.

1 DSR 2 RXD 7 RTS 3 CTS 4 DTR 9 RI 5 NC Ethernet Ports Two Ethernet ports (LAN1/LAN2) are located next to the VGA port on the I/O back panel. An IPMI Dedicated LAN port is also located above the USB0/1 ports on the X9SCM-F. This provides a dedicated network connection for IPMI 2.0 support. These ports accept RJ45 type connec- tors/cables.

NC = No connection 5-15 Back Panel USB0/1 Pin Defi nitions Pin# Defi nition Pin# Defi nition 1 +5V 5 +5V 2 USB PN1 _ 6 USB PN0 _ 3 USB PP1 _ 7 USB PP0 _ 4 Ground 8 Ground Front/Back Panel USB2/3, 11, 12/13 Pin Defi nitions USB 2/4/11/12 USB 3/5/13 Pin # Defi nition Pin # Defi nition 1 +5V 6 +5V 2 USB PN2 _ 7 USB PN3 _ 3 USB PP2 _ 8 USB PP3 _ 4 Ground 9 Ground 5 No Con- nection 10 Key CDC 6 TXD 8 Ground 10 LAN Port Pin Defi nitions Pin# Defi nition 1 GND 9 TD0+ 2 Vcc19-LAN 10 TD0 3 TD3+ 11 Link 100 LED 4 TD3- 12 Link 100 LED 5 TD2+- 13 3.3V 6 TD2- 14 Act LED 7 TD1+- 15 GND 8 TD1- 16 GND