Supermicro SuperServer 5017C-TF — Supermicro SuperServer 5017C-TF User's Manual PDF Download

S UPER S ERVER 5017C-TF User's Manual Fan Headers The X9SCM-F has five fan headers (Fan1 ~ Fan4 and FanA). These are all 4-pin fan headers, however pins 1-3 are backward compatible with traditional 3-pin fans. A fan speed control setting in the BIOS (Hardware Monitoring section) allows the BIOS to automatically set fan speeds based on the system tempera- ture. Refer to the table on the right for pin defi nitions. Note : Please use all 3-pin fans or all 4-pin fans on a motherboard. Do not mix 3-pin fans and 4-pin fans on the same board. Chassis Intrusion A Chassis Intrusion header is located at JL1 on the motherboard.

Attach the ap- propriate cable from the chassis to inform you of a chassis intrusion when the chas- sis is opened. ATX PS/2 Keyboard and PS/2 Mouse Ports The ATX PS/2 keyboard and the PS/2 mouse ports are located beside the USB ports. See the table on the right for pin defi nitions. External Speaker On the JSPK header, pins 3~4 are used to activate the onboard (internal) speaker. Close pins 3~4 with a jumper to use the onboard speaker. If you wish to use an external speaker, attach the external speaker's cable to pins 1~4. See the table on the right for pin defi nitions.

5-16 Fan Header Pin Defi nitions Pin# Defi nition 1 Ground (Black) 2 2.5A/+12V (Red) 3 Tachometer 4 PWM Control _ Chassis Intrusion Pin Defi nitions Pin# Defi nition 1 Intrusion Input 2 Ground PS/2 Keyboard and Mouse Ports Pin Defi nitions Pin# Defi nition 1 Data 2 NC 3 Ground 4 VCC 5 Clock 6 NC Speaker Connector Pin Defi nitions Pin Setting Defi nition Pins 3~4 Internal Speaker Pins1~4 External Speaker