Supermicro SuperServer 5017C-TF — Supermicro SuperServer 5017C-TF User's Manual PDF Download

Chapter 5: Advanced Motherboard Setup 5-10 Onboard Indicators LAN1/LAN2 LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each Giga- bit LAN port, the yellow LED indicates activity when blinking while the other LED may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associated with the connection speed LED. IPMI Dedicated LAN In addition to the LAN ports, a dedicated IPMI LAN port is also included on the X9SCM-F. The yellow LED on the right indicates activity, while the green LED on the left indicates the speed of the connection. See the tables at right for more information.

Onboard Standby Power LED An Onboard Standby Power LED is located at LE2 on the motherboard. When LE2 is on, the AC power cable is connected. Make sure to disconnect the power cable before removing or installing any component. IPMI Heartbeat LED An IPMI Heartbeat LED is located at LE7. When LE7 blinks, the IPMI is functioning properly. Refer to the table on the right for details. 5-21 LAN LED Connection Speed Indicator LED State Defi nition Off No connection or 10 Mb/s Green 100 Mb/s Amber 1 Gb/s IPMI LAN Link LED (Left) & Activity LED (Right) LED Color Defi nition Link (left) Green: Solid 100 Mbps Activity (right) Yellow:

Blink- ing Active Onboard Standby PWR LED LED State Defi nition Off System Off On System on, or System off and PWR Cable Connected IPMI Heartbeat Indicator) LED LED Defi nition Link (left) IPMI is ready for use