Chapter 7: BIOS Stop Bits: 1 or 2 Parity: None , Even, Odd, Mark, or Space X Hardware Health Confi guration Fan Speed Control Mode This feature allows the user to decide how the system controls the speeds of the onboard fans. The CPU temperature and the fan speed are correlative. When the CPU on-die temperature increases, the fan speed will also increase for effective system cooling. Select "Full Speed" to allow the onboard fans to run at full speed (of 100% Pulse Width Modulation Duty Cycle) for maximum cooling. This setting is recommended for special system confi guration or debugging.
Select "Standard" for the onboard fans to run at 50% of the Initial PWM Cycle in order to balance the needs between system cooling and power saving. This setting is recommended for regular systems with normal hardware confi gurations. Select "Optimal" for the onboard fans to run at 30% of the Initial PWM Cycle for best power effi ciency and maximum quietness. The options are Full Speed (@100% of PWM Cycle), Standard (@50% of PWM Cycle), and Optimal (@30% of PWM Cycle). CPU Temperature Display Mode This feature displays the CPU temperature detected by DTS (i.e., +34 o C) or tem- perature status in text ("Low", "Medium" or "High"). The options are Text Mode or DTS.
If Text Mode is selected, the CPU Temperature Display Mode will show the CPU temperature status as follows: Low – This level is considered as the ‘normal’ operating state. The CPU temperature is well below the CPU ‘Temperature Tolerance’. The mother- board fans and CPU will run normally as confi gured in the BIOS (Fan Speed Control). User intervention: No action required. Medium – The processor is running warmer. This is a ‘precautionary’ level and generally means that there may be factors contributing to this condition, but the CPU is still within its normal operating state and below the CPU ‘Temperature Tolerance’. The motherboard fans and CPU will run normally as confi gured in the BIOS.
The fans may adjust to a faster speed depending on the Fan Speed Control settings. User intervention: No action is required. However, consider checking the CPU fans and the chassis ventilation for blockage. 7-13