S UPER S ERVER 5017C-TF User's Manual High – The processor is running hot. This is a ‘caution’ level since the CPU’s ‘Temperature Tolerance’ has been reached (or has been exceeded) and may activate an overheat alarm: The information provided above is for your reference only. For more information on thermal management, please refer to Intel’s Web site at www.Intel.com. Fan1 ~ Fan4, FanA Reading This feature displays the fan speed readings from fan interfaces Fan1 through Fan4 and FanA. 12V, VDIMM, 5VCC, -12V, AVCC, 3.3VCC, VSB, VBAT This feature displays the current voltages of the above voltage monitors.
X ACPI Confi guration Use this feature to confi gure Advanced Confi guration and Power Interface (ACPI) power management settings for your system. High Performance Event Timers Select Enabled to activate the High Performance Event Timer (HPET) that produces periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in synchronizing multimedia streams, providing smooth playback and reducing the de- pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc- tion embedded in the CPU. The High Performance Event Timer is used to replace the 8254 Programmable Interval Timer. The options are Enabled and Disabled.
Suspend Mode This setting allows you to confi gure the ACPI (Advanced Confi guration and Power Interface) sleep state for your system when it is in the Suspend mode. The options are Suspend Disabled, S1 (POS), and S3 (STR) . S3 (STR) is the deepest sleep state in these options. NUMA Support This feature Enables the Non-Uniform Memory Access ACPI support. The options are Enabled and Disabled. WHEA Support This feature Enables the Windows Hardware Error Architecture (WHEA) support for the Windows 2008 operating system (and later versions). The options are Enabled and Disabled. 7-14