Chapter 4: Motherboard Connections SuperServer 5019S-ML User's Manual 4.5 LED Indicators BMC Heartbeat LED A BMC Heartbeat LED is located at LEDBMC on the motherboard. When LEDBMC is blinking, the BMC is functioning normally. LAN LEDs Two LAN ports are located on the rear I/O panel of the motherboard. Each Ethernet LAN port has two LEDs. The green LED indicates activity, while the other Link LED may be green, amber, or off to indicate the speed of the connection. Onboard Power LED The Onboard Power LED is located at LEDPWR. When this LED is on, the system is on. Be sure to turn off the system and unplug the power cord before removing or installing components.
Dedicated IPMI LAN LEDs An IPMI LAN is also located on the rear I/O panel. The LED on the right indicates activity, while the LED on the left indicates the speed of the connection. M.2 LED An M.2 LED is located at LE3 on the motherboard. When LE3 is blinking, M.2 is functioning normally. LAN3/LAN4 Front Panel Activity LEDs The front panel NIC (Network Interface Connection) activity LED indicators for LAN3/LAN4 are located at J7/J8. 55 54 Onboard Power LED Indicator LED Color Definition Green: Blinking BMC:
Normal LAN1-4 Activity LED (Right) LED State Color Status Definition Yellow Flashing Active LAN1-4 Link LED (Left) LED State LED Color Definition Off No Connection/10 Mbps Amber 1 Gbps Green 100 Mbps Onboard Power LED Indicator LED Color Definition Off System Off (power cable not connected) Green System On IPMI LAN LEDs LED Color/State Definition Link (left) Green: Solid Amber: Solid 100 Mbps 1Gbps Activity (Right) Amber: Blinking Active M.2 LED State LED Color Definition Green: Blinking Device Working