SuperServer 5019S-ML User's Manual Chapter 6: BIOS Logical Device Settings Serial Port Console Redirection This item displays the current status of a serial part specified by the user. Serial Port 2 Change Settings COM1 Console Redirection This feature specifies the base I/O port address and the Interrupt Request address of a serial port specified by the user. Select Auto to allow the BIOS to automatically assign the base I/O and IRQ address. Console Redirection Select Enabled to enable console redirection support for a serial port specified by the user. The options are Enabled and Disabled . If this feature is set to Enabled, the following items will become available:
The options for Serial Port 2 are Use Automatic Settings , (IO=2F8h; IRQ=3; DMA), (IO=3F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), (IO=2F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), (IO=3E8h; IRQ=3, 4, 5,7, 9, 10, 11, 12; DMA), and (IO=2E8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA). COM1 Console Redirection Settings Serial Port 2 Attribute This feature allows the user to specify how the host computer will exchange data with the client computer, which is the remote computer used by the user. Select SOL to use COM Port 2 as a Serial_Over_LAN (SOL) port for console redirection. The options are COM and SOL .
COM1 Terminal Type The options for Serial Port 4 are Use Automatic Settings , (IO=248h; IRQ=7; DMA), (IO=240h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), (IO=248h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), (IO=250h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), and (IO=258h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA). This feature allows the user to select the target terminal emulation type for Console Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to add color and function key support. Select ANSI to use the Extended ASCII Character Set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters into one or more bytes. The options are ANSI, VT100, VT100+ , and VT-UTF8.
Intel Server Platform Services Intel Server Platform Services Configuration COM1 Bits Per second The following items will display as detected by the BIOS: ME BIOS Interface Version Use this feature to set the transmission speed for a serial port used in Console Redirection. Make sure that the same speed is used in the host computer and the client computer. A lower transmission speed may be required for long and busy lines. The options are 9600, 19200, 38400, 57600, and 115200 (bits per second). SPS Version ME FW (Firmware) Status Value COM1 Data Bits Use this feature to set the data transmission size for Console Redirection. The options are 7 Bits and 8 Bits .
ME FW (Firmware) State ME FW (Firmware) Operation State COM1 Parity ME FW (Firmware) Error Code A parity bit can be sent along with regular data bits to detect data transmission errors. Select Even if the parity bit is set to 0, and the number of 1's in data bits is even. Select Odd if the parity bit is set to 0, and the number of 1's in data bits is odd. Select None if you do not want to send a parity bit with your data bits in transmission. Select Mark to add a mark as a parity bit to be sent along with the data bits. Select Space to add a Space as a parity bit to be sent with your data bits. The options are None , Even, Odd, Mark and Space.
ME NM FW (Firmware) Status Value BIOS Booting Mode Cores Disabled COM1 Stop Bits ME FW (Firmware) SKU Information A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard serial data communication. Select 2 Stop Bits if slower devices are used. The options are 1 and 2. End-of POST Status 79 78