SuperServer 5019S-ML User's Manual Chapter 6: BIOS Trusted Computing Configuration (Available when a TPM device is installed and the onboard TPM jumper is enabled) Add an Attempt Security Device Support Delete Attempts If this feature and the TPM jumper on the motherboard are both set to Enabled, onbaord security devices will be enabled for TPM (Trusted Platform Module) support to enhance data integrity and network security. Please reboot the system for a change on this setting to take effect. The options are Disabled and Enabled . Change Attempt order 6.4 Event Logs TPM State This submenu allows the user to configure Event Log settings. This feature changes the TPM State.
The options are Disabled and Enabled . Note : Please reboot the system for the changes on the TPM State to take effect. Pending TPM operation Use this item to schedule a TPM-related operation to be performed by a security device for system data integrity. Your system will reboot to carry out a pending TPM operation. The options are None and TPM Clear. Device Select Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices. TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable support for both versions. The default setting is Auto . The following are information will be displayed:
TPM Enabled Status Change SMBIOS Event Log Settings TPM Active Status This feature allows the user to configure SMBIOS Event settings. TPM Owner Status Enabling/Disabling Options SMBIOS Event Log TXT Support Intel TXT (Trusted Execution Technology) helps protect against software-based attacks and ensures protection, confidentiality and integrity of data stored or created on the system. Use this feature to enable or disable TXT Support. The options are Disabled and Enabled. Select Enabled to enable SMBIOS (System Management BIOS) Event Logging during system boot. The options are Enabled and Disabled.
Erasing Settings iSCSi Configuration Erase Event Log Select Yes to erase all error events in the SMBIOS (System Management BIOS) log before an event logging is initialized at bootup. The options are No , Yes, Next reset, and Yes, every reset. iSCSI Initiator Name This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format. Once the name of the iSCSI Initiator is entered into the system, configure the proper settings for the following items. 85 84