SUPERSERVER 5028TK-HTR/HTTR User's Manual 2-5 Installing the System into a Rack This section provides information on installing the SC827HQ+ chassis into a rack unit with the quick-release rails provided. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the installation instructions that came with the rack unit you are using. NOTE: This rail will fit a rack between 26" and 33.5" deep. The chassis package includes two rail assemblies in the rack mounting kit. Each assembly consists of two sections:
an inner fixed chassis rail that secures directly to the server chassis and an outer fixed rack rail that secures directly to the rack itself (Figure 2-1). Separating the Sections of the Rack Rails Figure 2-1. Separating the Rack Rails Separating the Inner and Outer Rails 1 1 Rail Assembly 1. Locate the rail assembly in the chassis packaging. 2. Extend the rail assembly by Extending the Rails 3. Press the quick-release tab. pulling it outward. 1 2 4. Separate the inner rail 1 3 extension from the outer rail assembly. Quick-Release Tab 1 4 Separating the Inner Rail Extension Warning: do not pick up the server with the front handles. They are designed to pull the system from a rack only. 2-4