Supermicro 5038MD-H24TRF — Supermicro SuperServer 5038MD-H24TRF User's Manual PDF

Chapter 3: Maintenance and Component Installation 3.3 Motherboard Components Memory Installation Memory Support The X10SDE-DF supports DDR4 VLP ECC memory; up to 64GB of unbuffered (UDIMM) memory or up to 128GB of registered (RDIMM) memory in four memory slots per node. Node 1 has slots P1-DIMMA1, P1-DIMMA2, P1-DIMMB1, and P1-DIMMB2. Node 2 has slots P2- DIMMA1, P2-DIMMA2, P2-DIMMB1, and P2-DIMMB2. Populating these DIMM modules with a pair of memory modules of the same type and size will result in interleaved memory, which will improve memory performance. Check the Supermicro website for possible updates to memory support.

DIMM Module Population Configuration For optimal memory performance, follow the table below when populating memory. Note : 2400MHz memory speed is only supported when using 16 GB DDR4 RDIMM ECC memory. 25 Processors and their Corresponding Memory Modules CPU# Corresponding DIMM Modules CPU DIMMA1 DIMMA2 DIMMB1 DIMMB2 Memory Module Population for Optimal Performance Number of DIMMs Memory Population Configuration Table 2 DIMMs DIMMA1/DIMMB1 4 DIMMs DIMMA1/DIMMB1, DIMMA2/DIMMB2 Memory Module Population DIMM Slots per Channel DIMM Type POR Speeds (MHz) Ranks per DIMM Layer Count FW Base Supported Voltage 2 DDR4 VLP ECC 2400, 2133,1866, 1600, 1333 SR, DR 6 SPS 1.2V1