SuperServer 5038MD-H24TRF User's Manual Memory Module Population Max Memory 4GB DRAM Technology 8GB DRAM Technology Possible Single Rank UDIMM 16GB (4x 4GB DIMMs) 32GB (4x 8GB DIMMs) Dual Rank 32GB (4x 8GB DIMMs) 64GB (4x 16GB DIMMs) UDIMMs Speed (MT/s); Voltage (V); Slots per Channel (SPC) and DIMMs per 2 Slots per Channel 2 DPC 2400 1.2 V 2400 2400 2400 DIMM Module Population Sequence When installing memory modules, the DIMM slots must be populated in the following order: P1-DIMMA1, P1-DIMMB1, P1-DIMMA2, P1-DIMMB2, then P2-DIMMA1, P2-DIMMB1, P2- DIMMA2, P2-DIMMB2. The blue slots must be populated first.
Towards the CPU DIMMA1 DIMMA2 (Blue Slot) DIMMB1 DIMMB2 (Blue Slot) Towards the edge of the motherboard Note: Be sure to use memory modules of the same type and speed on the motherboard. Mixing of memory modules of different types and speeds is not allowed. 26 Populating Memory Mo Type Spee (V); S Ranks DIMM (SPC Per Capacity Chan DIMM (GB) and 2 Slo Data Width 1 DP 4 Gb 8 Gb 1.2 V RDIMM SRx4 8 GB 16 GB 2133 RDIMM SRx8 4 GB 8 GB 2133 RDIMM DRx8 8 GB 16 GB 2133 RDIMM DRx4 16 GB 32 GB 2133