SuperServer 5038MD-H24TRF User's Manual Move Cord Release Tab Figure 3-13. Replacing the Upper Power Supply Module 3. Pull the PSU2 power cord out and to the side so that is does not interefere with PSU1 being pulled from the system. 4. Press and hold the release tab on the left of the power module. 5. Grasp the handle and pull the power supply out of its bay. 6. Push the replacement power supply module into the empty bay until it clicks into the locked position. 7. Secure the PSU2 power cord anchor plate. 8. Plug the AC power cord back into the power supply module. 36