Supermicro 5038MD-H24TRF — Supermicro SuperServer 5038MD-H24TRF User's Manual PDF

SuperServer 5038MD-H24TRF User's Manual 4.4 LED Indicators LAN1/2 LEDs for Node 1 and Node 2 The Ethernet ports have two LEDs. On each port, one LED indicates activity when flashing while the other LED may be green, amber or off to indicate the speed of the connection. IPMI_LAN LED The yellow LED on the right indicates activity, while the multi-color LED on the left indicates the speed of the connection. IPMI LAN Activity LED Link LED Power LED Indicators Two LEDs indicate power to each node. When P1-Power LED is on, the power supply is connected to Node 1. When P2-Power LED is on, the power supply is connected to Node 2.

Press the power button at SW1 to power on or power off Node 1 and Node 2. UID LED Indicator An LED Indicator is located at LED7 on the motherboard. The unit identifier (UID) indicator provides identification of a system unit that may be in need of service. UID can be triggered using the IPMI on the motherboard. For more information, refer to the IPMI User's Guide at http://www.supermicro.com. 42 LAN1/2 LED (Connection Speed Indicator) LED Color Definition Off 100 Mb/s Green 10 Gb/s Amber 1 Gb/s IPMI LAN LED Link LED (Left) and Activity LED (Right) LED Color Definition Link (Left) Amber: Solid 1 Gb/s Green: Solid 100 Mb/s Activity (Right) Yellow:

Blinking Active Power Indicator LEDs Color/State Definition Green Power to Node Orange Standby