Supermicro 5038MD-H8TRF — Supermicro SuperServer 5038MD-H8TRF User's Manual (Revision 1.0) PDF

Chapter 3: Maintenance and Component Installation Install Procedure Installing Memory 1. Remove power from the system as described in Section 3.1. 2. Starting with P1-DIMMA1, push the Notches release tabs outwards on both ends of the DIMM slot to unlock it. Release Tabs 3. Align the key of the DIMM with the receptive point on the memory slot and with your thumbs on both ends of the module, press it straight down into the slot until the module snaps into place. Press both notches straight down into the memory slot. 4. Press the release tabs to the locked position to secure the DIMM module into the slot. 5.

Repeat the procedure for the remaining DIMM modules in the order detailed in the previous section. To remove a DIMM module, unlock the release tabs then pull the module from the slot. Caution: Exercise caution when installing or removing memory modules to prevent damage to the DIMMs or slots. Note: Visit the product page on the Supermicro website for possible updates to memory support ( www.supermicro.com ). 33