SuperServer 5038MD-H8TRF User's Manual Expansion Modules Each node supports one PCIe 3.0 x8 low-profile expansion card and one MicroLP expansion module. The latter is pre-installed. Currently, there are four supported MicroLP expansion modules for the 5038MD-H8TRF system providing LAN connections. Two LAN ports (standard), AOM-CGP-i2M Two QSFP + USB ports (optional), AOM-CIBF-M1M Two SFP+ USB ports (optional), AOM-CTG-i1SM Two 10G baseT ports (optional), AOM-CTGS-i2T The low-profile PCIe card is mounted using a riser card to connect it to the motherboard expansion slot. The riser card is pre-installed on the motherboard. Installing a Low Profile Expansion Card 1.
Power-down the node using that node's power button and remove the node from the chassis as described previously. 2. On the rear of the node, open the PCI slot clip and remove the PCI slot shield. 3. Insert the expansion card into the riser card slot while fitting the expansion card bracket in the opening in the rear of the node. If necessary, the riser card may be removed from the motherboard by removing the riser card bracket. 4. Close the PCI card slot clip to secure the expansion card. 34