Supermicro 5038MD-H8TRF — Supermicro SuperServer 5038MD-H8TRF User's Manual (Revision 1.0) PDF

Chapter 4: Motherboard Connections System Management Bus A System Management Bus header for the IPMI slot is located at JIPMB1. Connect the appropriate cable here to use the IPMB I 2 C connection on your system. SGPIO Header The S-SGPIO1 (Serial General Purpose Input/Output) header supports the SAS/SATA interface. NC = No Connection Data Cables The data cables in the system have been carefully routed to maintain airflow efficiency. If you disconnect any of these cables, take care to re-route them as they were originally when reconnecting them.

45 System Management Bus Pin Definitions Pin# Definition 1 Data 2 Ground 3 Clock 4 No Connection SGPIO Header Pin Definitions Pin# Definition Pin# Definition 1 NC 2 NC 3 Ground 4 Data 5 Load 6 Ground 7 Clock 8 NC