Chapter 5: Advanced Motherboard Setup Extra Universal Serial Bus Connection (USB0) Table 5-12 USB0 Pin Definitions (JF1) An additional connection for USB0 is included on pins 25, 27, 29, 31 and 33 of JF1 for front side USB access. You cannot have devices connected to both this and the back side connector at U25. See Table 5-12 for pin definitions and Figure 5-2 for pin locations. You will need a USB cable (not in- cluded) to use this connection. Overheat LED (OH) Connect an LED to the OH connec- tion on Pin 26 of JF1 to provide advance warning of chassis over- heating. Refer to Table 5-13 for pin definitions and Figure 5-2 for pin locations.
Table 5-13 Overheat LED(OH) Pin Definitions (JF1) Speaker Table 5-14 Speaker Connector Pin Definitions (JF1) The speaker connection is located on pins 28, 30, 32 and 34 of JF1. See Table 5-14 for pin definitions and Figure 5-2 for pin locations. 5-15 Pin Number Definition 25 27 29 31 +5V PO- PO+ Ground Pin Number Definition 26 OH Active Pin Number Function Definition 28 30 32 34 "+" Key "-" Red wire, Speaker PWR No connection Key Speaker data