S UPER S ERVER 6040 Manual Fan Headers* There are several fan headers on the 370DE6 to provide cooling for various components. In addition to one fan header for each proces- sor, there are one overheat and two chassis fan headers. See the motherboard layout on page 5-10 for locations. Refer to Table 5-15 for pin definitions. Table 5-15 Fan Header Pin Definitions (CPU, CHASSIS and OH FANs) * Caution: These fan headers are DC power. *Note: The maximum current limitation for the onboard fans is 0.35 amps for each, not to exceed 1.2 amps for any group of four fans.
Serial Ports Table 5-16 Serial Port Pin Definitions (COM1, COM2) Serial connectors COM1 and COM2 are located under the parallel port (see Figure 5-8). See Table 5-16 for pin definitions. ATX PS/2 Keyboard and PS/2 Mouse Ports Table 5-17 PS/2 Keyboard and Mouse Port Pin Definitions (J18) The ATX PS/2 keyboard and the PS/2 mouse are located on J18. See Table 5-17 for pin definitions. (The mouse port is above the key- board port. See Figure 5-8.) *Note: "NC" indicates "no connections".
5-16 Pin Number Definition 1 2 3 Ground (black) +12V (red) Tachometer Pin Number Definition Pin Number Definition 1 DCD 2 DSR 3 Serial In 4 RTS 5 Serial Out 6 CTS 7 DTR 8 RI 9 Ground 10 *NC Pin Number Definition 1 2 3 4 5 6 Data *NC Ground VCC Clock *NC