Supermicro 8048B-TRFT — SuperServer 8048B-TRFT User's Manual

SUPERSERVER 8048B-TRFT USER'S MANUAL Figure 5-2. Rear I/O Ports (Horizontal) 2 1 3 Connecting the Control Panel JF1 contains header pins for various front control panel connectors. See Figure 5-3 for the pin locations of the various front control panel buttons and LED indicators. Even and odd numbered pins are on opposite sides of each header. All JF1 wires have been bundled into single keyed ribbon cable to simplify their connection. The red wire in the ribbon cable plugs into pin 1 of JF1. Connect the other end of the cable to the Control Panel printed circuit board, located just behind the system status LEDs in the chassis.

See the Connector Definitions section in this chapter for details and pin descriptions of JF1. Ground 19 20 X FP PWRLED HDD LED NIC1 Link LED NIC1 Active LED Red (OH/Fan Fail/ PWR FaiL) NIC2 Link LED NIC2 Active LED Blue Led Cathode Power Fail LED Ground Ground Power Button Reset Button Figure 5-3. Front Control Panel Header Pins (JF1) 2 1 5-4 Rear I/O Ports 1. USB Port 2. USB Port 3 Serial (COM) Port NMI X 3.3 3.3 NIC NIC Blu (UID 3.3 Reset PWR