Supermicro 8048B-TRFT — SuperServer 8048B-TRFT User's Manual

Chapter 5: Advanced Serverboard Setup Figure 5-5. X10QBi-MEM1 Memory Card Image 4 3 DIMM C3 DIMM C2 DIMM C1 DIMM D3 DIMM D2 DIMM D1 Memory Buffer Controller Memory Buffer Controller DIMM A3 DIMM A2 DIMM A1 DIMM B3 DIMM B2 DIMM B1 2 Always install DIMMs in the blue slots first (in order of DIMMA1, DIMMB1, DIMMC1, and DIMMD1). 1 After populating DIMMs on the memory cards, follow the table below to Install one or two populated memory cards for each CPU installed on the baseboard. The baseboard has eight slots to accommodate eight memory cards.

Slots for Memory Cards SMI Slot P1M2 (for CPU1) SMI Slot P2M1 (for CPU2) SMI Slot P2M2 (for CPU2) SMI Slot P3M1 (for CPU3) SMI Slot P3M2 (for CPU3) SMI Slot P4M1 (for CPU4) SMI Slot P1M1 (for CPU1) SMI Slot P4M2 (for CPU4) X10QBi Rev:1.00 BAR CODE MAC CODE MAC CODE 5-11 CPUs and their Corresponding Memory Cards CPU# Corresponding DIMM Modules One Memory Card Per CPU Two Memory Cards Per CPU CPU 1 SMI Slot P1M1 (populate this slot fi rst) SMI Slot P1M1 + SMI Slot P1M2 CPU 2 SMI Slot P2M1 (populate this slot fi rst) SMI Slot P2M1 + SMI Slot P2M2 CPU 3 SMI Slot P3M1 (populate this slot fi rst) SMI Slot P3M1 + SMI Slot P3M2 CPU 4 SMI Slot P4M1 (populate this slot fi rst) SMI Slot P4M1 + SMI Slot P4M2