Supermicro 8048B-TRFT — SuperServer 8048B-TRFT User's Manual

SUPERSERVER 8048B-TRFT USER'S MANUAL X10QBi Quick Reference Jumper Description Default Setting Connector Description 5-16 JBT1 Clear CMOS See Section 5-10 JI2C1/JI2C2 SMB to PCI-E Slots Enable/Disable Pins 2-3 (Disabled) JPB1 (on I/O module) BMC Enable/Disable Pins 1-2 (Enabled) JPG1 (on I/O module) VGA Enable/Disable Pins 1-2 (Enabled) JPME1 ME Mode Recovery Pins 1-2 (Normal) JPME2 ME Mode Select Pins 1-2 (Normal) JPL1 (on I/O module) GLAN1/GLAN2 Enable Pins 1-2 (via con­ nected cable) JPT1 TPM Enable/Disable Pins 1-2 (Enabled) JWD1 Watch Dog Pins 1-2 (Reset) FAN1-FAN10 4-pin System/Cooling Fan Headers BT2 Onboard Battery COM1 Serial/COM Part 1 (located on the I/O module) COM2 Serial/COM Port Header 2 I-SATA 0-5 Intel SATA Ports 0-5 JD1 Speaker/Power LED Indicator JF1 Front Panel Control Header JIPMB1 4-pin External BMC I2C Header (for an IPMI Card) JL1 Chassis Intrusion Header JOH1 Overheat/Fan Fail LED Header JPI2C1 Power Supply SMBbus I2C Header JPW1 ATX 24-pin Power Connector JPW2-JPW7 8-pin Power Connectors JSD1 SATA DOM (Device on Module) Power Connector JVG1/2 VGA/Video Port1/Port2 (located on the I/O module) LAN1/2 Gb Ethernet Ports 1/2 (located on the I/O module) LAN3 (on the I/O module) BMC LAN (Dedicated IPMI LAN) (JLAN3) SP1 Internal Speaker T-SGPIO 1/2 Serial Link General Purpose I/O Headers USB0/1, USB2/3, USB6/7 Front Panel Accessible USB Connections USB4, USB5 Type A Front Panel USB Connectors 4/5 UID UID Switch (SWUID1/SW1) (on the I/O module) VGA 1/2 VGA Port