Supermicro 8048B-TRFT — SuperServer 8048B-TRFT User's Manual

Chapter 5: Advanced Serverboard Setup NIC1/2 (LAN1/2) LED Indicators The NIC (Network Interface Controller) LED indicator connections for GLAN port 1 are located on pins 11 and 12 of JF1, and those of the GLAN Port 2 are on pins 9 and 10. Attach NIC LED cables here to display network activity. Refer to the table on the right for pin definitions. HDD LED The HDD LED connection is located on pins 13 and 14 of JF1. Attach the hard drive LED cable here to display disk activity (for any hard drives on the system). See the table on the right for pin definitions Power On LED The Power On LED connector is located on pins 15 and 16 of JF1.

This connection is used to provide LED indication of power being supplied to the system. See the table on the right for pin definitions. NMI Button The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the table on the right for pin definitions. Fan Headers The X10QBi has ten system fan headers and ten CPU card fan headers. All these are 4-pin fans and are backward compatible with traditional 3-pin fans. Fan speed control is available via IPMI interface for 4-pin fans only. See the table on the right for more information.

5-19 NIC1/2 LEDs Pin Defini­ tions (JF1) Pin# Definition 9 NIC2 Activity LED 10 NIC2 Link LED 11 NIC1 Activity LED 12 NIC1 Link LED HDD LED Pin Definitions (JF1) Pin# Definition 13 3.3V Standby 14 HD Active Power LED Pin Definitions (JF1) Pin# Definition 15 3.3V 16 PWR LED NMI Button Pin Definitions (JF1) Pin# Definition 19 Control 20 Ground Fan Header Pin Definitions Pin# Definition 1 Ground 2 +12V 3 Tachometer 4 PWM Modulation (4-pin fans only)