SUPERSERVER 8048B-TRFT USER'S MANUAL Universal Serial Bus (USB) Three Universal Serial Bus headers provide six USB connections on the baseboard (USB 0/1, 2/3, 6/7). Additionally, two Type A USB connectors (USB4, USB5) are also located on the board (cables not included). Refer to the tables on the right for pin definitions. (NC= No Connection) Chassis Intrusion A Chassis Intrusion header is located at JL1 on the serverboard. Attach an appropriate cable from the chassis to be informed of possible chassis intrusion when the chassis is opened. Internal Speaker The internal speaker, located at SP1, can be used to provide audible indications for various beep codes.
See the table on the right for pin definitions. 5-20 Type A USB (USB4/5) Pin Definitions Pin# Definition 1 +5V 2 PO- 3 PO+ 4 Ground 5 NA Backplane Accessible (USB0/1, 2/3, 6/7) USB Connectors Pin Definitions USB0/2/6 USB1/3/7 Pin# Definition Pin# Definition 1 +5V 1 +5V 2 PO- 2 PO- 3 PO+ 3 PO+ 4 Ground 4 Ground 5 NC 5 Key Chassis Intrusion Pin Definitions Pin# Definition 1 Intrusion Input 2 Ground Internal Speaker Pin Definition Pin# Definitions Pin 1 Pos. (+) Beep In Pin 2 Neg. (-) Alarm Speaker