Chapter 6: Advanced Chassis Setup 6-3 Installing Hard Drives The hard drives are mounted in drive carriers to simplify their installation and removal from the chassis. These carriers also help promote proper airflow for the drive bays. As hot-swappable components, the system may continue running while hard drives are added or replaced to the carriers. Removing Hard Drive Carriers from the Chassis 1. Press the release button on the drive carrier. This extends the drive carrier 2. Use the handle to pull the drive carrier out of the chassis. handle. Figure 6-2. Removing a Hard Drive Carrier 1 2 1 1 Note:
Enterprise level hard disk drives are recommended for use in Supermicro chassis and servers. For information on recommended HDDs, visit the Supermicro website at http://www.supermicro.com/products/nfo/files/storage/SAS-1- CompList-110909.pdf 6-3