Chapter 6: Advanced Chassis Setup 6-6 Cooling System The SC848 chassis contains four 9-cm system fans that provide cooling for the chassis and three 8-cm exhaust fans at the rear of the chassis for expelling hot air. All fans are hot-swappable, there is no need to power down the system when replacing fans. Replacing a System Fan 1. If necessary, open the chassis top cover while the power is running to determine which fan has failed. (Never run the server for an extended period of time with the chassis top cover open.) 2. Power down the system, unplug the cords from the back of the power 3.
Press the fan release tab to lift the failed fan from the chassis and pull it supplies and remove the chassis top cover. completely from the chassis. 4. Place the new fan into the vacant space in the housing while making sure the arrows on the top of the fan (indicating air direction) point in the same direction as the arrows on the other fans. 5. Power up the system and check that the fan is working properly before installing the top cover back onto the chassis. Figure 6-7. Installing a Front System Fan Release Tab 6-7