Supermicro 8048B-TRFT — SuperServer 8048B-TRFT User's Manual

SUPERSERVER 8048B-TRFT USER'S MANUAL 6-5 Installing the Air Shroud Air Shrouds Air shrouds concentrate airflow to maximize fan efficiency. The SC848 chassis air shrouds (p/n MCP-310-41804-0B) do not require screws to install them. Installing the Air Shroud 1. Power down the system, remove the cords from the back of the power supplies and open the chassis top cover. 2. Place the air shroud in the chassis so that it fits between the middle bracket and the rear window. 3. Insert the front hooks of the air shroud into the interstices on the back of the 4. Put the top cover back on the chassis, plug the power cords back into the middle fan bracket. power supplies and power up the system. Note:

when installing four memory modules as shown below, you must purchase a secondary air shroud from SMC (p/n MCP-310-41805-0B). Figure 6-5. Installing the Air Shroud Figure 6-6. Secondary Air Shroud Placement 6-6