Supermicro 8048B-TRFT — SuperServer 8048B-TRFT User's Manual

Chapter 6: Advanced Chassis Setup 6-4 Accessing the Inside of the System Removing the Chassis Cover You will need to access the inside of the system to complete certain procedures such as replacing fans. Removing the Chassis Cover 1. Power down the system and unplug the cords from the back of the power supplies. 2. Remove the screws securing the top cover to the chassis if these screws are present. 3. Simultaneously press the release tabs to free the top cover from the locked 4. Slide the top cover toward the rear of the chassis. position. 5. Lift the top cover off the chassis. Figure 6-4. Accessing the Inside of the System 1 3 1 5 1 4 1 3 1 2 Remove these screws (if present) Caution:

Except for short periods of time, do NOT operate the server without the cover in place. The chassis cover must be in place to allow proper airflow and prevent overheating. 6-5