Supermicro SuperServer 8060 — Supermicro SuperServer 8060 User Manual PDF – 4U Quad Xeon Server Guide

Chapter 5: Advanced Motherboard Setup Chapter 5 Advanced Motherboard Setup This chapter covers the steps required to install the S2QE6 motherboard into the SC860 chassis, connect the data and power cables and install add- on cards. All motherboard jumpers and connections are also described. A layout and quick reference chart are on pages 5-12 and 5-13. Remember to completely close the chassis when you have finished working with the motherboard to better cool and protect the system. Tools Required The only tools you will need to install the S2QE6 into the chassis are a long and a short Philips screwdriver.

5-1 Handling the S2QE6 Motherboard Static electrical discharge can damage electronic components. To prevent damage to any printed circuit boards (PCBs), it is important to handle them very carefully (see previous chapter). Also note that the size and weight of the S2QE6 motherboard can cause it to bend if handled improperly, which may result in damage. To prevent the S2QE6 motherboard from bending, keep one hand under the center of the board to support it when handling. The following measures are generally sufficient to protect your equipment from static discharge. Precautions Use a grounded wrist strap designed to prevent static discharge.

Touch a grounded metal object before removing any board from its anti- static bag. Handle a board by its edges only; do not touch its components, periph- eral chips, memory modules or gold contacts. When handling chips or modules, avoid touching their pins. Put the motherboard, add-on cards and peripherals back into their anti- static bags when not in use. 5-1