Chapter 5: Advanced Motherboard Setup Extra Universal Serial Bus Connection (USB0) Table 5-12 USB0 Pin Definitions (JF1) An additional connection for USB0 is included on pins 25, 27, 29 and 31 of JF1 for front side USB ac- cess. You cannot have devices connected to both this and the back side connector at U25. See Table 5-12 for pin definitions and Figure 5-2 for pin locations. You will need a USB cable (not in- cluded) to use this connection. Overheat LED (OH) Connect an LED to the OH connec- tion on pins 25 and 26 of JF1 to provide advanced warning of chassis overheating. Refer to Table 5-13 for pin definitions and Figure 5-2 for pin locations.
Table 5-13 Overheat LED(OH) Pin Definitions (JF1) Speaker Table 5-14 Speaker Connector Pin Definitions (JF1) The speaker connection is located on pins 28, 30, 32 and 34 of JF1. See Table 5-14 for pin definitions and Figure 5-2 for pin locations. 5-17 Pin Number Definition 25 27 29 31 +5V PO- PO+ Ground Pin Number Definition 25 26 GND OH Input Pin Number Definition 28 30 32 34 Power NC NC Data