Supermicro SuperServer 8060 — Supermicro SuperServer 8060 User Manual PDF – 4U Quad Xeon Server Guide

S UPER S ERVER 8060 Manual Power Supply Failure Alarm Enable/Disable Table 5-24 Power Supply Failure Alarm Enable/Disable Jumper Settings (JP55) The system will notify you in the event of a power supply failure. You need to have the PWR P cable connected to use this feature. The default setting is disabled. See Table 5-24 for jumper set- tings. Overheat Buzzer Alarm Enable/Disable Table 5-25 Overheat Alarm Enable/Disable Jumper Settings (JP56) JP56 gives you the option of dis- abling the audio alarm signal that notifies you of power failure, fan failure and overheat conditions. If disabled, you will still be notified of such conditions by the LED cor- responding to the fault.

The de- fault setting is enabled. See Table 5-25 for jumper settings. BIOS Select The S2QE6 has two BIOS chips to provide a backup if one becomes corrupted. (Switching from one BIOS chip to the other must be done manually.) The setting of jumper JP57 determines which of the two BIOS chips will be used. The Primary BIOS chip is the de- fault setting. See Table 5-26 for jumper settings. Table 5-26 BIOS Select Jumper Settings (JP57) 5-22 Jumper Position Definition Open Closed Disabled Enabled Jumper Position Definition Open Closed Disabled Enabled Jumper Position Definition 1-2 2-3 Primary BIOS Secondary BIOS