S UPER S ERVER 8060 Manual The options for this setting are On and Off. When this option is set to On, the BIOS turns off the Num Lock key when the system is powered on. This will enable the end user to use the arrow keys on both the numeric keypad and the keyboard. Boot Up Num-Lock PS/2 Mouse Support The options for this setting are Enabled and Disabled. When this option is set to Enabled, AMIBIOS supports a PS/2-type mouse. Primary Display The options for this setting are Absent, VGA/EGA , CGA 40x25, CGA 80x25 and Mono. Password Check This setting enables the password check option every time the system boots or the end user runs WinBIOS Setup.
If Always is chosen, a user password prompt appears every time the computer is turned on. If Setup is chosen, the password prompt appears if WinBIOS Setup is executed. Boot to OS/2 If DRAM size is over 64 MB, set this option to Yes to permit AMIBIOS to run with IBM OS/2. The options are No and Yes. Processor Serial Number Intel included a serial number in their Pentium III and Pentium III Xeon processors as a unique system identifier. Select Enabled to allow the processor's serial number to be detected by application software programs. For privacy reasons, you can disable the release of this identifier. The options for this setting are Enabled and Disabled .
CPU Microcode Updation This option allows the BIOS to update the CPU Microcode. The options for this setting are Disabled and Enabled . Internal Cache (L1 Cache) This option is for enabling or disabling the internal cache memory. The options for this setting are Disabled, WriteThru and WriteBack . External Cache (L2 Cache) This option is for enabling or disabling the external cache memory. The options for this setting are Disabled, WriteThru and WriteBack . 7-8