Supermicro SuperServer 8060 — Supermicro SuperServer 8060 User Manual PDF – 4U Quad Xeon Server Guide

S UPER S ERVER 8060 Manual Write Combining for P6-to-PCI: The options for this setting are Enabled and Disabled. This bit enables or disables the combining (bursting) of accesses within the PCI memory regions. The BWCR register provides the write combining enable/disable bit for each region. This bit acts as a master bit to enable the write combining for all the regions. The main memory system of the CNB30 supports various clock speeds and memory speeds. The MTCR (Memory Timing Control Register) dictates the memory controller to generate the DRAM timing accordingly. Act to Deact The options for this setting are 6CLKS and 5CLKS.

Act to Read/Write The options for this setting are 3CLKS and 2CLKS. RAS Precharge Time This setting defines the RAS Precharge Time. The options are 3 CLKS , and 2 CLKS. RAS Cycle Time This option defines the RA Cycle Time. The options are 10CLKS, 9CLKS, 8CLKS , and 7CLKS. Write to Deact The options for this setting are 3CLKS and 2CLKS. SDRAM CAS Latency The options for this setting are CAS Latency3 and CAS Latency2. Memory Auto Precharge The options for this setting are Enabled and Disabled. SDRAM Fast Timing The options for this setting are 10-1-1-1 and 11-1-1-1.

When the value set to 10-1-1-1, the CNB30 drives the CAS# signal one clock earlier and reduces the lead time of a page hit read by one clock. Memory Write Posting The options for this setting are Enabled and Disabled. 7-10