Chapter 7: BIOS/Setup ISA IO Cycle Delay The options for this setting are Full, 1.5 BCLK, 2.5 BCLK and 3.5 BCLK. Scrubbing Enable The options for this setting are Disabled and Enabled . Set "Enabled" to allow the CNB30 to perform "scrubbing"(--i.e. writing the ECC corrected memory data back to the DRAM). MPS Support The options for this setting are Enabled and Disabled. Select "Enabled" to activate Multi-Processor System Support. Power Management ACPI Aware O/S The options for this setting are No and Yes . Available with ACPI only. The operating system has the built-in ACPI features. Select "Yes" to permit the OS to detect the ACPI functions in the system.
Power Management/APM The options for this setting are Enabled and Disabled . If "Enabled" is selected, the Power Management/Advanced Power Management mode will be activated. Video Power Down Mode When in the AMP mode, this option specifies the power conserving state that the VGA video subsystem enters after the specified period of display inactivity has expired. The options are Disabled and Suspend. Note: The Optimal default setting for this option is Suspend and the Fail-Safe default setting is Disabled .
Hard Disk Power Down Mode When in the AMP mode, this option specifies the power conserving state that the hard disk drive enters after the specified period of hard drive inactivity has expired. The options are Disabled and Suspend . Note: The Optimal default setting for this option is Suspend and the Fail-Safe default setting is Disabled . Hard Disk Time Out (Minutes) When in the AMP mode, this option specifies the length of a period of hard disk drive inactivity. When this length of time expires, the computer 7-11